Try “Xiaomi 14”, “marble”, “Redmi Note 13” or “OS2.0”
Mi Pad 4 (Plus)
MIUI 10.3StableChina

Mi Pad 4 (Plus) MIUI 10.3 V10.3.2.0.ODJCNXM

Stable firmware for the China Mi Pad 4 (Plus) (clover), released May 24, 2019.

Download V10.3.2.0.ODJCNXM

Recovery ROM (OTA .zip) · 1.4 GB Install from the phone’s updater app — keeps your data.
MD5: 371ac63e9eaa6267eed83a5a556eea08
Download
Fastboot ROM (.tgz) · 1.6 GB Full image for Mi Flash Tool — clean install, unbrick or downgrade.
MD5: 4388d99e5ee79face25f690b577a7e77
Download

Files are served from Xiaomi’s official servers. Compare the MD5 checksum after downloading to make sure the file is complete and untouched.

Firmware details

Device
Mi Pad 4 (Plus)
Codename
clover
Region
China
Version
V10.3.2.0.ODJCNXM
OS
MIUI 10.3
Android
8.1
Branch
Stable
Released
May 24, 2019
Package
Recovery 1.4 GB / Fastboot 1.6 GB

How to install V10.3.2.0.ODJCNXM

Recovery ROM (recommended, keeps data)

  1. Back up your important data and charge the phone to at least 50%.
  2. Download the Recovery ROM above on your Mi Pad 4 (Plus).
  3. Open Settings → About phone and tap the MIUI version card.
  4. Tap the ⋮ menu → Choose update package and select the downloaded .zip file.
  5. Wait for verification, then tap Reboot now. The update takes 10–20 minutes.

Fastboot ROM (clean install, needs unlocked bootloader)

  1. Make sure the bootloader is unlocked and install Mi Flash Tool plus the Xiaomi USB drivers on a Windows PC.
  2. Download and extract the Fastboot ROM (.tgz) to a short path such as C:\rom.
  3. Power off the phone, hold Volume Down + Power to enter Fastboot mode and connect it via USB.
  4. In Mi Flash Tool select the extracted folder, choose clean all (wipes data) and avoid “clean all and lock” unless you want to relock.
  5. Click Flash and wait until the tool shows success; the phone reboots automatically.

Other Mi Pad 4 (Plus) (China) builds

Device page →
DeviceVersionAndroidBranchReleased
Mi Pad 4 (Plus)China · clover9.8.29
MIUI BetaWeekly
8.1Weekly

Frequently asked questions

Is V10.3.2.0.ODJCNXM an official Mi Pad 4 (Plus) update?
Yes. V10.3.2.0.ODJCNXM is an official Stable MIUI 10.3 build for the Mi Pad 4 (Plus) (China), released by Xiaomi on May 24, 2019. The download links point directly to Xiaomi’s update servers.
Which Android version does V10.3.2.0.ODJCNXM use?
This firmware is based on Android 8.1.
Will installing V10.3.2.0.ODJCNXM erase my data?
Installing the Recovery package through the updater app keeps your apps and data. Flashing the Fastboot package with “clean all” wipes the phone — back up first.
Can I install this on another region’s device?
Only install firmware that matches your device’s region (China) and codename (clover). Cross-region flashing requires an unlocked bootloader and can cause problems.