Try “Xiaomi 14”, “marble”, “Redmi Note 13” or “OS2.0”
Redmi Pad Pro / POCO Pad
HyperOS 3.0StableEEA

Redmi Pad Pro / POCO Pad HyperOS 3.0 OS3.0.304.0.WNSEUXM

Stable firmware for the EEA Redmi Pad Pro / POCO Pad (dizi_eea_global), released November 2, 2026.

Download OS3.0.304.0.WNSEUXM

Recovery ROM (OTA .zip) · 5.2 GB Install from the phone’s updater app — keeps your data.
MD5: 60704a9164cd80da2f99e9aad3b62b8f
Download
Fastboot ROM (.tgz) · 6.1 GB Full image for Mi Flash Tool — clean install, unbrick or downgrade.
MD5: 57b184a8a35b91d67bad71ee522e9546
Download

Files are served from Xiaomi’s official servers. Compare the MD5 checksum after downloading to make sure the file is complete and untouched.

Firmware details

Device
Redmi Pad Pro / POCO Pad
Codename
dizi_eea_global
Region
EEA
Version
OS3.0.304.0.WNSEUXM
OS
HyperOS 3.0
Android
16.0
Branch
Stable
Released
Nov 2, 2026
Package
Recovery 5.2 GB / Fastboot 6.1 GB

How to install OS3.0.304.0.WNSEUXM

Recovery ROM (recommended, keeps data)

  1. Back up your important data and charge the phone to at least 50%.
  2. Download the Recovery ROM above on your Redmi Pad Pro / POCO Pad.
  3. Open Settings → About phone and tap the HyperOS version card.
  4. Tap the ⋮ menu → Choose update package and select the downloaded .zip file.
  5. Wait for verification, then tap Reboot now. The update takes 10–20 minutes.

Fastboot ROM (clean install, needs unlocked bootloader)

  1. Make sure the bootloader is unlocked and install Mi Flash Tool plus the Xiaomi USB drivers on a Windows PC.
  2. Download and extract the Fastboot ROM (.tgz) to a short path such as C:\rom.
  3. Power off the phone, hold Volume Down + Power to enter Fastboot mode and connect it via USB.
  4. In Mi Flash Tool select the extracted folder, choose clean all (wipes data) and avoid “clean all and lock” unless you want to relock.
  5. Click Flash and wait until the tool shows success; the phone reboots automatically.

Redmi Pad Pro / POCO Pad firmware for other regions

Frequently asked questions

Is OS3.0.304.0.WNSEUXM an official Redmi Pad Pro / POCO Pad update?
Yes. OS3.0.304.0.WNSEUXM is an official Stable HyperOS 3.0 build for the Redmi Pad Pro / POCO Pad (EEA), released by Xiaomi on November 2, 2026. The download links point directly to Xiaomi’s update servers.
Which Android version does OS3.0.304.0.WNSEUXM use?
This firmware is based on Android 16.0.
Will installing OS3.0.304.0.WNSEUXM erase my data?
Installing the Recovery package through the updater app keeps your apps and data. Flashing the Fastboot package with “clean all” wipes the phone — back up first.
Can I install this on another region’s device?
Only install firmware that matches your device’s region (EEA) and codename (dizi_eea_global). Cross-region flashing requires an unlocked bootloader and can cause problems.