Try “Xiaomi 14”, “marble”, “Redmi Note 13” or “OS2.0”
Redmi Pad Pro 5G
HyperOS 3.0StableChina

Redmi Pad Pro 5G HyperOS 3.0 OS3.0.307.0.WFSCNXM

Stable firmware for the China Redmi Pad Pro 5G (ruan), released July 29, 2026.

Download OS3.0.307.0.WFSCNXM

Recovery ROM (OTA .zip) · 5.6 GB Install from the phone’s updater app — keeps your data.
MD5: 9b706c5c856dfc40dfee231d2f05000a
Download
Fastboot ROM (.tgz) · 6.6 GB Full image for Mi Flash Tool — clean install, unbrick or downgrade.
MD5: 97880903436cb38d2aa020a2f57ca93b
Download

Files are served from Xiaomi’s official servers. Compare the MD5 checksum after downloading to make sure the file is complete and untouched.

Firmware details

Device
Redmi Pad Pro 5G
Codename
ruan
Region
China
Version
OS3.0.307.0.WFSCNXM
OS
HyperOS 3.0
Android
16.0
Branch
Stable
Released
Jul 29, 2026
Package
Recovery 5.6 GB / Fastboot 6.6 GB

How to install OS3.0.307.0.WFSCNXM

Recovery ROM (recommended, keeps data)

  1. Back up your important data and charge the phone to at least 50%.
  2. Download the Recovery ROM above on your Redmi Pad Pro 5G.
  3. Open Settings → About phone and tap the HyperOS version card.
  4. Tap the ⋮ menu → Choose update package and select the downloaded .zip file.
  5. Wait for verification, then tap Reboot now. The update takes 10–20 minutes.

Fastboot ROM (clean install, needs unlocked bootloader)

  1. Make sure the bootloader is unlocked and install Mi Flash Tool plus the Xiaomi USB drivers on a Windows PC.
  2. Download and extract the Fastboot ROM (.tgz) to a short path such as C:\rom.
  3. Power off the phone, hold Volume Down + Power to enter Fastboot mode and connect it via USB.
  4. In Mi Flash Tool select the extracted folder, choose clean all (wipes data) and avoid “clean all and lock” unless you want to relock.
  5. Click Flash and wait until the tool shows success; the phone reboots automatically.

Redmi Pad Pro 5G firmware for other regions

Frequently asked questions

Is OS3.0.307.0.WFSCNXM an official Redmi Pad Pro 5G update?
Yes. OS3.0.307.0.WFSCNXM is an official Stable HyperOS 3.0 build for the Redmi Pad Pro 5G (China), released by Xiaomi on July 29, 2026. The download links point directly to Xiaomi’s update servers.
Which Android version does OS3.0.307.0.WFSCNXM use?
This firmware is based on Android 16.0.
Will installing OS3.0.307.0.WFSCNXM erase my data?
Installing the Recovery package through the updater app keeps your apps and data. Flashing the Fastboot package with “clean all” wipes the phone — back up first.
Can I install this on another region’s device?
Only install firmware that matches your device’s region (China) and codename (ruan). Cross-region flashing requires an unlocked bootloader and can cause problems.